Foxwell F1000 AC/DC Clamp Leaker

FOXWELL F1000 AC/DC Clamp Leaker With up-to-date CT technology, Foxwell F1000 AC/DC Clamp Leaker is specially designed for measurement of AC/DC current. It is capable of peak holding, data holding and data storage. The kit includes one RS232 interface, a communication cable and monitoring software which lets users monitor current on line and review and print test records. It is also able to draw active curve and show max, min and average values. Specifications: Model F1000 Function Measurement of AC/DC current Power Supply Dry battery, 6LR61, 9V, lasting for 40hours Test Mode Clip-on CT, noncontact mode Display Mode Four digits LCD display Dimension 185mm×70mm×38mm LCD Dimension 35mm×21.5mm; display domain: 32mm×15mm Sampling Rate 2 times/s Frequency AC 45Hz~400Hz Polarity Indication DC current can be auto-identified and display “—” Clamp Size 30mm×35mm Test Position Tested wire in the jaw center; Error will increase to 1.5% rdg max if deviate the center Range Shift Automatically Line Voltage 600V Com-Configure Baud rate: 9600, data bit:8, stop bit: 1 Data Memory 99 units, FULL blinks when the memory is full Reading Hold DH indicating the reading is hold Out of Range OL indicating the current is out of range Auto Power-off It will power off automatically after it is powered on 5 minutes to lower the power consumption. Battery Voltage Indicating the battery voltage is lower than 7.2V and the battery have to be changed Weight 200g (including the battery) Operating Current 10mA Temperature and Humidity Working: -10℃-, below 80% rh Storage: -10℃-60℃, below 70% rh Limit Temperature Error -10℃-0℃, 40℃-50℃, Error will increase max to 1% rdg Insulating Strength AC2kV/rms (between the alloy of the clamp and the housing) Applicable safety rules IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ (600V) Limit Temperature Error -10℃-0℃ and 40℃-50℃, within 2% rdg Kit Includes: F1000 AC/DC Clamp Leaker User’s Guide Bag